Features

• Output voltage in table chart with 120VAC applied and fully loaded.
• Enclosure Temperature does not exceed 65°C in a 40°C ambient, fully loaded.
• The actual transformer (xxxVA) is encapsulated in the enclosure.
• The transformer is dimmable with all dimmers that provide symmetrical form of the current under any condition.
• Input leads are 16 or 18 AWG output leads are 12 AWG. Lead insulation is 105°C.
• The transformer uses a class B (130°C) insulation system.
• The transformer has a manual reset thermal 2A or 3A circuit breaker on the primary side, or 6A breaker on the secondary side indicated by the marked check box on the label.
• Wiring compartment has 2 or 3 knockouts sized for 3/4 inch screw cable connectors.
• The wiring compartment cover hinged with rivets and opens vertically from bottom to top.
• The enclosure, available in black powder coated is NEMA 3R rated.
• The Transformer is UL listed.
• The label contains Techno magnet’s catalog number and electrical rating.
• All transformers come with 6 in. wire length.
• Include Boost Tap will increase output by 10% – for longer runs.

Specification

• Max Load – 100W.
• Input – 120V/60HZ.
• Output.
• 120AC – 12V.
• Boost – 12V.
• Input Current – 1.4A.
• Open Circuit Current – 0.5A.

Technical Specifications

• Heavy-duty NEMA 3R enclosure.
• 120-volt primary-12-volt secondary with 13-volt boost tap.
• Wired for timer or photocell.
• Prewired 6 ft. cord and plug (3 conductor / 18ga SJT).
• Manual reset 20A circuit breaker on the secondary side.
• Screw-type terminal blocks for output wires (8-14 gauge.
• Enclosure temperature does not exceed 65° c fully-loaded.
• UL listed encapsulated transformer for longer life.
• Transformer is dimmable using low-voltage magnetic dimmers.
• Wiring compartment has(3)3/4 in. Knockouts.
• NEMA 3R enclosure with Polyester powder coat.
• Finish – Black.