Slit Coupling, Set Screw, Short, Bores 0.188″x0.125″, OD 0.512″, Alum

$70,99

This Ruland supplied slit coupling is zero-backlash and has a balanced design for reduced vibration at high speeds up to 30,000 RPM. The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings. It is set screw style and has 0.188″ x 0.125″ bores, 0.512″ OD, and 0.661″ length. This short style slit coupling can fit in confined spaces where the long style may not fit. It can accommodate all forms of misalignment with low bearing loads helping to protect small sensitive bearings. This slit coupling is manufactured by Reliance Precision Ltd. in their facility in County Cork, Ireland and is RoHS and REACH compliant.

Out of stock

SKU: GRG3401084 Category:

Description

[{“name”:”Bore Dia.”,”normalizedValue”:”0.188 in x 1/8 in”,”rank”:2,”value”:”0.188 in x 0.125 in”},{“name”:”Max. RPM”,”normalizedValue”:”30000 RPM”,”rank”:4,”value”:”30000 RPM”},{“name”:”Outside Dia.”,”normalizedValue”:”0.512 in”,”rank”:5,”value”:”0.512 in”},{“name”:”Overall Length”,”normalizedValue”:”0.661 in”,”rank”:6,”value”:”0.661 in”},{“name”:”Length”,”normalizedValue”:”0.661 in”,”value”:”0.661 in”},{“name”:”Weight”,”normalizedValue”:”0.0123 lb”,”value”:”0.0123 lbs”},{“name”:”Material”,”normalizedValue”:”Anodized Aluminum”,”value”:”Anodized Aluminum”},{“name”:”Torsional Stiffness (Deg./In.-Lbs.)”,”normalizedValue”:”7.1 lb-in/Deg”,”value”:”7.1 lb-in/Deg”},{“name”:”Max. Temp. Range (F)”,”normalizedValue”:”-110°F to 175°F (-78°C to 79°C)”,”value”:”-110°F to 175°F (-78°C to 79°C)”},{“name”:”Max. Parallel Misalignment (In.)”,”normalizedValue”:”0.003″,”value”:”0.003 in”},{“name”:”Max. Angular Misalignment”,”normalizedValue”:”2.5 deg”,”value”:”2.5 deg”},{“name”:”Style”,”normalizedValue”:”Set Screw”,”value”:”Set Screw”},{“name”:”Measurement Type”,”normalizedValue”:”Inch”,”value”:”Inch”},{“name”:”Screw Seating Torque”,”normalizedValue”:”0.44 N-m”,”value”:”0.44 Nm”},{“name”:”B1 Shaft Penetration”,”normalizedValue”:”0.276 in”,”value”:”0.276 in”},{“name”:”Bore Tolerance”,”normalizedValue”:”+0.001 in, -0.000 in”,”value”:”+0.001 in / -0.000 in”},{“name”:”Dynamic Torque Non-Reversing”,”normalizedValue”:”6.2 in-lb”,”value”:”6.2 lb-in”},{“name”:”Screw Material”,”normalizedValue”:”18-8 300 Series Stainless Steel”,”value”:”18-8 300 Series Stainless Steel”},{“name”:”B2 Shaft Penetration”,”normalizedValue”:”0.276 in”,”value”:”0.276 in”},{“name”:”Number of Screws”,”normalizedValue”:”4″,”value”:”4″},{“name”:”Set Screw Size”,”normalizedValue”:”M2.5″,”value”:”M2.5″},{“name”:”Moment of Inertia”,”normalizedValue”:”0.0156 lb-in^2″,”value”:”0.0156 lb-in^2″},{“name”:”Dynamic Torque Reversing”,”normalizedValue”:”4.4 in-lb”,”value”:”4.4 lb-in”},{“name”:”Axial Motion”,”normalizedValue”:”0.012 in”,”value”:”0.012 in”},{“name”:”Screw Finish”,”normalizedValue”:”Bright”,”value”:”Bright”},{“name”:”Country of Origin (subject to change)”,”normalizedValue”:”Ireland”,”value”:”Ireland”},{“name”:”Package Quantity”,”normalizedValue”:”1″,”value”:”1″}]

Reviews

There are no reviews yet.

Be the first to review “Slit Coupling, Set Screw, Short, Bores 0.188″x0.125″, OD 0.512″, Alum”