Slit Coupling, Clamp, Short, Bores 7x7mm, OD 20.0mm, Aluminum

$79,19

This Ruland supplied slit coupling is zero-backlash and has a balanced design for reduced vibration at high speeds up to 7,500 RPM. The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings. It is clamp style and has 7mm x 7mm bores, 20.0mm OD, and 21.50mm length. This short style slit coupling can fit in confined spaces where the long style may not fit. It can accommodate all forms of misalignment with low bearing loads helping to protect small sensitive bearings. This slit coupling is manufactured by Reliance Precision Ltd. in their facility in County Cork, Ireland and is RoHS and REACH compliant.

Out of stock

SKU: GRG3406955 Category:

Description

[{“name”:”Bore Dia.”,”normalizedValue”:”7 mm x 7 mm”,”rank”:2,”value”:”7 mm x 7 mm”},{“name”:”Max. RPM”,”normalizedValue”:”7500 RPM”,”rank”:4,”value”:”7500 RPM”},{“name”:”Outside Dia.”,”normalizedValue”:”20 mm”,”rank”:5,”value”:”20 mm”},{“name”:”Overall Length”,”normalizedValue”:”21.5 mm”,”rank”:6,”value”:”21.50 mm”},{“name”:”Weight”,”normalizedValue”:”0.0303 lb”,”value”:”0.0303 lbs”},{“name”:”Material”,”normalizedValue”:”Anodized Aluminum”,”value”:”Anodized Aluminum”},{“name”:”Length”,”normalizedValue”:”21.5 mm”,”value”:”21.50 mm”},{“name”:”Max. Angular Misalignment”,”normalizedValue”:”3 deg”,”value”:”3 deg”},{“name”:”Max. Temp. Range (F)”,”normalizedValue”:”-110°F to 175°F (-78°C to 79°C)”,”value”:”-110°F to 175°F (-78°C to 79°C)”},{“name”:”Clearance Dia. (mm)”,”normalizedValue”:”21.8″,”value”:”21.8 mm”},{“name”:”Screw Size”,”normalizedValue”:”M2.5″,”value”:”M2.5″},{“name”:”Torsional Stiffness (Deg./In.-Lbs.)”,”normalizedValue”:”1.9 Nm/Deg”,”value”:”1.9 Nm/Deg”},{“name”:”Style”,”normalizedValue”:”Clamp”,”value”:”Clamp”},{“name”:”Max. Parallel Misalignment (In.)”,”normalizedValue”:”0.0047″,”value”:”0.12 mm”},{“name”:”Screw Seating Torque”,”normalizedValue”:”2.5 N-m”,”value”:”2.50 Nm”},{“name”:”Number of Screws”,”normalizedValue”:”2″,”value”:”2″},{“name”:”Dynamic Torque Non-Reversing”,”normalizedValue”:”1.45 N-m”,”value”:”1.45 Nm”},{“name”:”Screw Finish”,”normalizedValue”:”Bright”,”value”:”Bright”},{“name”:”B2 Shaft Penetration”,”normalizedValue”:”8.6 mm”,”value”:”8.6 mm”},{“name”:”Measurement Type”,”normalizedValue”:”Metric”,”value”:”Metric”},{“name”:”Bore Tolerance”,”normalizedValue”:”-0.000 mm, +0.020 mm”,”value”:”+0.020 mm / -0.000 mm”},{“name”:”Moment of Inertia”,”normalizedValue”:”7.8 g.cm^2″,”value”:”7.8 g.cm^2″},{“name”:”Dynamic Torque Reversing”,”normalizedValue”:”0.95 N-m”,”value”:”0.95 Nm”},{“name”:”Axial Motion”,”normalizedValue”:”0.5 mm”,”value”:”0.50 mm”},{“name”:”B1 Shaft Penetration”,”normalizedValue”:”8.6 mm”,”value”:”8.6 mm”},{“name”:”Screw Material”,”normalizedValue”:”18-8 300 Series Stainless Steel”,”value”:”18-8 300 Series Stainless Steel”},{“name”:”Country of Origin (subject to change)”,”normalizedValue”:”Ireland”,”value”:”Ireland”},{“name”:”Package Quantity”,”normalizedValue”:”1″,”value”:”1″}]

Reviews

There are no reviews yet.

Be the first to review “Slit Coupling, Clamp, Short, Bores 7x7mm, OD 20.0mm, Aluminum”