Slit Coupling, Clamp, Short, Bores 7x6mm, OD 20.0mm, Aluminum

$82,89

This Ruland supplied slit coupling is zero-backlash and has a balanced design for reduced vibration at high speeds up to 7,500 RPM. The coupling is made from a single piece of aluminum and has two sets of slit cuts allowing for low inertia, no maintenance, and high torsional stiffness when compared to beam couplings. It is clamp style and has 7mm x 6mm bores, 20.0mm OD, and 21.50mm length. This short style slit coupling can fit in confined spaces where the long style may not fit. It can accommodate all forms of misalignment with low bearing loads helping to protect small sensitive bearings. This slit coupling is manufactured by Reliance Precision Ltd. in their facility in County Cork, Ireland and is RoHS and REACH compliant.

9999 in stock

SKU: GRG3401644 Category:

Description

[{“name”:”Bore Dia.”,”normalizedValue”:”7 mm x 6 mm”,”rank”:2,”value”:”7 mm x 6 mm”},{“name”:”Max. RPM”,”normalizedValue”:”7500 RPM”,”rank”:4,”value”:”7500 RPM”},{“name”:”Outside Dia.”,”normalizedValue”:”20 mm”,”rank”:5,”value”:”20 mm”},{“name”:”Overall Length”,”normalizedValue”:”21.5 mm”,”rank”:6,”value”:”21.50 mm”},{“name”:”Material”,”normalizedValue”:”Anodized Aluminum”,”value”:”Anodized Aluminum”},{“name”:”Length”,”normalizedValue”:”21.5 mm”,”value”:”21.50 mm”},{“name”:”Weight”,”normalizedValue”:”0.0307 lb”,”value”:”0.0307 lbs”},{“name”:”Torsional Stiffness (Deg./In.-Lbs.)”,”normalizedValue”:”1.9 Nm/Deg”,”value”:”1.9 Nm/Deg”},{“name”:”Style”,”normalizedValue”:”Clamp”,”value”:”Clamp”},{“name”:”Clearance Dia. (mm)”,”normalizedValue”:”21.8″,”value”:”21.8 mm”},{“name”:”Max. Parallel Misalignment (In.)”,”normalizedValue”:”0.0047″,”value”:”0.12 mm”},{“name”:”Max. Angular Misalignment”,”normalizedValue”:”3 deg”,”value”:”3 deg”},{“name”:”Max. Temp. Range (F)”,”normalizedValue”:”-110°F to 175°F (-78°C to 79°C)”,”value”:”-110°F to 175°F (-78°C to 79°C)”},{“name”:”Screw Size”,”normalizedValue”:”M2.5″,”value”:”M2.5″},{“name”:”Moment of Inertia”,”normalizedValue”:”7.8 g.cm^2″,”value”:”7.8 g.cm^2″},{“name”:”Dynamic Torque Non-Reversing”,”normalizedValue”:”1.45 N-m”,”value”:”1.45 Nm”},{“name”:”B1 Shaft Penetration”,”normalizedValue”:”8.6 mm”,”value”:”8.6 mm”},{“name”:”Bore Tolerance”,”normalizedValue”:”-0.000 mm, +0.020 mm”,”value”:”+0.020 mm / -0.000 mm”},{“name”:”B2 Shaft Penetration”,”normalizedValue”:”8.6 mm”,”value”:”8.6 mm”},{“name”:”Measurement Type”,”normalizedValue”:”Metric”,”value”:”Metric”},{“name”:”Screw Seating Torque”,”normalizedValue”:”2.5 N-m”,”value”:”2.50 Nm”},{“name”:”Screw Material”,”normalizedValue”:”18-8 300 Series Stainless Steel”,”value”:”18-8 300 Series Stainless Steel”},{“name”:”Axial Motion”,”normalizedValue”:”0.5 mm”,”value”:”0.50 mm”},{“name”:”Screw Finish”,”normalizedValue”:”Bright”,”value”:”Bright”},{“name”:”Number of Screws”,”normalizedValue”:”2″,”value”:”2″},{“name”:”Dynamic Torque Reversing”,”normalizedValue”:”0.95 N-m”,”value”:”0.95 Nm”},{“name”:”Country of Origin (subject to change)”,”normalizedValue”:”Ireland”,”value”:”Ireland”},{“name”:”Package Quantity”,”normalizedValue”:”1″,”value”:”1″}]

Reviews

There are no reviews yet.

Be the first to review “Slit Coupling, Clamp, Short, Bores 7x6mm, OD 20.0mm, Aluminum”