Connect a hose bibb or garden hose to a low-flow drip system with the 1/2 in. X 1/2 in. X 3/4 in. FHT Compression Tee. The compression fitting has two 1/2 in. compression outlets and one 3/4 in. female hose thread inlet. Screw hose thread onto a standard 3/4 in. MHT connection point; fit 1/2 in. supply tubing or dripline into the compression rings, where an internal barb compresses the tubing for a watertight fit. Filter washer inside screens out particles. The compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.

• • Adds two branches of 1/2 in. distribution tubing or dripline from a 3/4 in. MHT connection point, such as a garden hose or hose bibb
• • Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system
• • 3/4 in. FHT swivel inlet connects to hose bibb and garden hose with 3/4 in. MHT connection point; 1/2 in. compression outlets connect to 1/2 in. tubing and dripline with outside diameter of 0.620 in.
• • Thread the 3/4 in. FHT inlet onto a garden hose, hose bibb, or faucet with a 3/4 in. MHT connection point; on the other end, insert two sections of tubing of the compression fitting, where an internal barb will compress the tube to hold it in place
• • Built-in swivel makes it convenient to remove or attach adapter without twisting and potentially kinking the tubing
• • Compression fitting creates a watertight seal; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting