Description

Air Inlet=1/4 in NPT
Free Speed=7,000 RPM
Handle Type=Pistol Grip
Housing Material=Composite
Max. Bolt Capacity=1/2 in
Max. Torque=960 ft.-lb.
Min. Hose Size=3/8 in
Torque Range=70 to 555 ft.-lb.
Required Pressure=90 psi
Tool Weight=4.7 lb
Handle Material=Rubber
Air Inlet Size – Air Tools=1/4″ NPT
Blows per Minute – Air Tools=1350
Item – Air Impact Wrenches=Air Impact Wrench
Average CFM @ 15 Second Run Time=6.20
Body Style – Air Tools=Pistol
Anvil Length – Air Impacts=2.000″
Retainer Type – Air Impacts=Ring
Duty Cycle – Air Tools=General Duty
Anvil Type – Air Impacts=2″ Extended
CFM @ Full Load=25.0
Item=Impact Wrench
Drive Size – Air Tools=1/2″ Square
Overall Length=8 7/8 in
Retainer Type=Friction Ring
Features=Hard Anodized End Plates, One-Hand Reverse System (Ring System), Resistant To Most Chemicals Used In Workshops
Number of Speed Settings=3
Clutch Style=Twin Hammer
Impact Rated=Yes
Tool Style=Compact
Min. Air Pressure=90 psi
Impacts per Minute=1,350
Impact Sound Level=105 dB
Max. Air Pressure=90 psi
Air Consumption=25 cfm
Air Pressure=90 psi
Standards=EN ISO 11148-6:2013, ISO 15744, ISO-28927-2
Breakaway Torque=960 ft-lb
Power to Weight Ratio=204 ft-lb/lb
Drive Type=Extended
Exhaust Location=Bottom
Vibration Level=11.3 m/sq sec
Extended Anvil Length=2 in
Fastening Torque=555 ft-lb
Duty Rating=General Duty
Built-In Light=No
Power Source=Air Powered
Drive Size=1/2 in Square