Description

[{“name”:”Fiber link 1 / Receive activity (LK1)”,”normalizedValue”:”This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.”,”value”:”This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.”},{“name”:”Edge Connecter”,”normalizedValue”:”32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power”,”value”:”32 pin DIN 41612 / IEC 60603-2 Type B/2 Male. Fist make, last break for ground and power”},{“name”:”Laser Safety”,”normalizedValue”:”EN 60825-1:2007″,”value”:”EN 60825-1:2007″},{“name”:”Card insertion and removal”,”normalizedValue”:”Captive thumb screws enable fast insertion and removal Can be further tighten with a screwdriver.”,”value”:”Captive thumb screws enable fast insertion and removal. Can be further tighten with a screwdriver.”},{“name”:”Bit Error Rate (BER)”,”normalizedValue”:”<10-12","value":"<10-12"},{"name":"Emissions","normalizedValue":"FCC Part 15 Class A, EN55022 Class A","value":"FCC Part 15 Class A, EN55022 Class A"},{"name":"Operating Altitude","normalizedValue":"Up to 3,048 meters (10,000 feet)","value":"Up to 3,048 meters (10,000 feet)"},{"name":"Electrical Safety","normalizedValue":"UL 60950-1","value":"UL 60950-1"},{"name":"Storage temperature","normalizedValue":"minimum range of -25 C to 70 C (-13 F to 158 F)","value":"minimum range of -25 C to 70 C (-13 F to 158 F)"},{"name":"Immunity","normalizedValue":"EN55024","value":"EN55024"},{"name":"Heat Output ( BTU/HR )","normalizedValue":"11.9","value":"11.9"},{"name":"Maximum Power Consumption ( Watts )","normalizedValue":"3.5","value":"3.5"},{"name":"Fiber Optic Cable","normalizedValue":"Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITU-T 625)","value":"Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron; Single Mode: 9/125 micron (ITU-T 625)"},{"name":"Storage Humidity","normalizedValue":"5% to 95% non-condensing","value":"5% to 95% non-condensing"},{"name":"Power / TST","normalizedValue":"This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode.","value":"This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode."},{"name":"Remote Loopback #2","normalizedValue":"The media converter can perform a loopback on the link #2 fiber interface; Disabled ; Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. Link #1's fiber transmitter is taken off the interface.","value":"The media converter can perform a loopback on the link #2 fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. Link #1's fiber transmitter is taken off the interface."},{"name":"Operating Humidity","normalizedValue":"5% to 90% non-condensing","value":"5% to 90% non-condensing"},{"name":"Fiber link 2 on / Receive activity (LK2)","normalizedValue":"This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.","value":"This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received."},{"name":"Operating temperature","normalizedValue":"0 C to 50 C (32 F to 122 F)","value":"0 C to 50 C (32 F to 122 F)"},{"name":"Remote Loopback #1","normalizedValue":"The media converter can perform a loopback on the link #1 fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. Link #2's fiber transmitter is taken off the interface","value":"The media converter can perform a loopback on the link #1 fiber interface; Disabled (Default - Up); Enabled- The 100Base-X receiver is looped to the 100Base-X transmitter. Link #2's fiber transmitter is taken off the interface"},{"name":"Link Pass Through","normalizedValue":"Enabled (Default)- When the state of the receiver is changed on one of the 100Base-X interfaces it is reflected on the other 100Base-X fiber transmitter; If disabled, the 100Base-X fiber interfaces operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the other interface.","value":"Enabled (Default)- When the state of the receiver is changed on one of the 100Base-X interfaces it is reflected on the other 100Base-X fiber transmitter; If disabled, the 100Base-X fiber interfaces operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the other interface."},{"name":"Country of Origin (subject to change)","normalizedValue":"Canada","value":"Canada"},{"name":"Package Quantity","normalizedValue":"1","value":"1"}]