Description

[{“name”:”Wire Size”,”normalizedValue”:”10 AWG”,”rank”:1,”value”:”10 AWG”},{“name”:”Number of Conductors”,”normalizedValue”:”3″,”rank”:4,”value”:”3″},{“name”:”Length”,”normalizedValue”:”500 ft”,”rank”:5,”value”:”500 ft”},{“name”:”Shielding”,”normalizedValue”:”Unshielded”,”rank”:6,”value”:”Unshielded”},{“name”:”Jacket Color”,”normalizedValue”:”Black”,”rank”:7,”value”:”Black”},{“name”:”Jacket Material”,”normalizedValue”:”Chlorinated Polyethylene”,”rank”:8,”value”:”Chlorinated Polyethylene”},{“name”:”Item”,”normalizedValue”:”Tray Cable”,”rank”:9,”value”:”Tray Cable”},{“name”:”Wire Color”,”normalizedValue”:”Black, Blue, Red”,”value”:”Black, Blue, Red”},{“name”:”Conductor Material”,”normalizedValue”:”Copper”,”value”:”Copper”},{“name”:”Voltage”,”normalizedValue”:”600 V”,”value”:”600 V”},{“name”:”Trade Designation”,”normalizedValue”:”TC-ER”,”value”:”TC-ER”},{“name”:”Nominal Outside Dia.”,”normalizedValue”:”0.43 in”,”value”:”0.43 in”},{“name”:”Standards”,”normalizedValue”:”ASTM B33, ASTM B8, ICEA S-58-679, ICEA S-73-532, ICEA S-95-658, IEEE 1202, UL 1277, UL 1685, UL 44″,”value”:”ASTM B33, ASTM B8, ICEA S-58-679, ICEA S-73-532, ICEA S-95-658, IEEE 1202, UL 1277, UL 1685, UL 44″},{“name”:”Temp. Rating”,”normalizedValue”:”250 Degrees C (Short Circuit Conditions)”,”value”:”250 Degrees C (Short Circuit Conditions)”},{“name”:”No. of Strands”,”normalizedValue”:”7″,”value”:”7″},{“name”:”Size (Awg or Kcmil)”,”normalizedValue”:”10 AWG”,”value”:”10 AWG”},{“name”:”Insulation Thickness (Mils)”,”normalizedValue”:”20 mil”,”value”:”20mils”},{“name”:”Nom. Od (Mils)”,”normalizedValue”:”433 mil”,”value”:”433mils”},{“name”:”Applications”,”normalizedValue”:”ApplicationSouthwire’s 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Exposed runs (TC-ER) per NEC 336.10. VW-1 Rated.”,”value”:”ApplicationSouthwire’s 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Exposed runs (TC-ER) per NEC 336.10. VW-1 Rated.”},{“name”:”No. of Conductors”,”normalizedValue”:”3″,”value”:”3″},{“name”:”Construction”,”normalizedValue”:”ConstructionConductor:7 strands class B compressed tinned copper per ASTM B33 and ASTM B8Insulation:Ethylene Propylene Rubber (EPR) XHHW-2, 30 Mils thick. VW-1 Rated.Binder:Polyester flat thread binder tapeOverall Jacket:Chlorinated Polyethylene (CPE) Jacket”,”value”:”ConstructionConductor:7 strands class B compressed tinned copper per ASTM B33 and ASTM B8Insulation:Ethylene Propylene Rubber (EPR) XHHW-2, 30 Mils thick. VW-1 Rated.Binder:Polyester flat thread binder tapeOverall Jacket:Chlorinated Polyethylene (CPE) Jacket”},{“name”:”Country of Origin (subject to change)”,”normalizedValue”:”United States”,”value”:”United States”},{“name”:”Package Quantity”,”normalizedValue”:”1″,”value”:”1″}]