Description

[{“name”:”Overall Length”,”normalizedValue”:”3.82 in”,”rank”:6,”value”:”3.82 in”},{“name”:”Bore Tolerance”,”normalizedValue”:”+0.001/-0.000 in”,”value”:”+0.001/-0.000 in”},{“name”:”Axial Motion”,”normalizedValue”:”0.03 in”,”value”:”0.03 in”},{“name”:”Dynamic Torque Reversing”,”normalizedValue”:”337.5 in-lb”,”value”:”337.5 lb-in”},{“name”:”Screw Material”,”normalizedValue”:”Alloy Steel”,”value”:”Alloy Steel”},{“name”:”Moment of Inertia”,”normalizedValue”:”2.745 lb-in sq”,”value”:”2.745 lb-in sq”},{“name”:”Dynamic Torque Non-Reversing”,”normalizedValue”:”675 in-lb”,”value”:”675 lb-in”},{“name”:”Item”,”normalizedValue”:”Bellows Coupling”,”value”:”Bellows Coupling”},{“name”:”Bore Diameter 2″,”normalizedValue”:”35 mm”,”value”:”35 mm”},{“name”:”Bellows Material”,”normalizedValue”:”Stainless Steel”,”value”:”Stainless Steel”},{“name”:”Maximum Bore Diameter”,”normalizedValue”:”1-1/2 in”,”value”:”1 1/2 in”},{“name”:”Hub Material Grade”,”normalizedValue”:”2024″,”value”:”2024″},{“name”:”Bellows Material Grade”,”normalizedValue”:”321″,”value”:”321″},{“name”:”Hub Material”,”normalizedValue”:”Aluminum”,”value”:”Aluminum”},{“name”:”Minimum Bore Diameter”,”normalizedValue”:”35 mm”,”value”:”35 mm”},{“name”:”Different Bore Sizes”,”normalizedValue”:”Yes”,”value”:”Yes”},{“name”:”System of Measurement”,”normalizedValue”:”Inch to Metric Bore”,”value”:”Inch to Metric Bore”},{“name”:”Coupling Outside Diameter”,”normalizedValue”:”3.13 in”,”value”:”3.13 in”},{“name”:”Bore Diameter 1″,”normalizedValue”:”1-1/2 in”,”value”:”1 1/2 in”},{“name”:”Standards”,”normalizedValue”:”Conflict Minerals Compliant, DIN 912 12.9 Screws, ISO 9001:2015, REACH Compliant, RoHS3 Compliant”,”value”:”Conflict Minerals Compliant, DIN 912 12.9 Screws, ISO 9001:2015, REACH Compliant, RoHS3 Compliant”},{“name”:”Application”,”normalizedValue”:”Encoders, Stepper / Servo”,”value”:”Encoders, Stepper / Servo”},{“name”:”Features”,”normalizedValue”:”Balanced Design for High RPM,Constant Velocity,High Torque with Low Inertia,High Torsional Stiffness,Long Life with no Maintenance”,”value”:”Balanced Design for High RPM,Constant Velocity,High Torque with Low Inertia,High Torsional Stiffness,Long Life with no Maintenance”},{“name”:”Included Screws”,”normalizedValue”:”Hex Cap Screw”,”value”:”(2) Hex Cap Screw”},{“name”:”Keyway Width 1″,”normalizedValue”:”3/8 in”,”value”:”3/8 in”},{“name”:”Bore Type”,”normalizedValue”:”Round Keyed”,”value”:”Round Keyed”},{“name”:”Full Bearing Support Required”,”normalizedValue”:”Yes”,”value”:”Yes”},{“name”:”Keyway Depth 1″,”normalizedValue”:”3/16 in”,”value”:”3/16 in”},{“name”:”Number of Locking Screws”,”normalizedValue”:”2″,”value”:”2″},{“name”:”Keyway Width 2″,”normalizedValue”:”10 mm”,”value”:”10 mm”},{“name”:”Angular Misalignment”,”normalizedValue”:”2 deg”,”value”:”2 Degrees”},{“name”:”Keyway Depth 2″,”normalizedValue”:”3.3 mm”,”value”:”3.3 mm”},{“name”:”Maximum Operating Temperature”,”normalizedValue”:”200 deg F”,”value”:”200 Degrees F”},{“name”:”Length Through Bore 2″,”normalizedValue”:”1-3/4 in”,”value”:”1.75 in”},{“name”:”Torsional Stiffness”,”normalizedValue”:”3,500 in-lb/Deg”,”value”:”3,500 in-lb/Deg”},{“name”:”Bellows Material Finish”,”normalizedValue”:””,”value”:”None”},{“name”:”Shaft Locking Type”,”normalizedValue”:”Clamp On”,”value”:”Clamp On”},{“name”:”Hub Material Finish”,”normalizedValue”:”Sulfuric Anodized”,”value”:”Sulfuric Anodized”},{“name”:”Parallel Misalignment”,”normalizedValue”:”0.012 in”,”value”:”0.012 in”},{“name”:”Maximum Torque”,”normalizedValue”:”1,350 in-lb”,”value”:”1,350 lb-in”},{“name”:”Screw Length”,”normalizedValue”:”25 mm”,”value”:”25 mm”},{“name”:”Screw Thread Size”,”normalizedValue”:”M8″,”value”:”M8″},{“name”:”Clearance Diameter”,”normalizedValue”:”3.13 in”,”value”:”3.13 in”},{“name”:”Maximum Speed”,”normalizedValue”:”10,000 rpm”,”value”:”10,000 RPM”},{“name”:”Minimum Operating Temperature”,”normalizedValue”:”-40 deg F”,”value”:”-40 Degrees F”},{“name”:”Screw Material Finish”,”normalizedValue”:”Black Oxide”,”value”:”Black Oxide”},{“name”:”Fastener Tightening Torque”,”normalizedValue”:”39 N-m”,”value”:”39 N-m”},{“name”:”Hub Length”,”normalizedValue”:”1.38 in”,”value”:”1.38 in”},{“name”:”Shaft Tolerance”,”normalizedValue”:”+0.0000 in, -0.0005 in”,”value”:”+0.0000 in / -0.0005 in”},{“name”:”Length Through Bore 1″,”normalizedValue”:”1-3/4 in”,”value”:”1.75 in”},{“name”:”For Misalignment Type”,”normalizedValue”:”Parallel, Angular, Axial”,”value”:”Angular, Axial, Parallel”},{“name”:”Zero Backlash”,”normalizedValue”:”Yes”,”value”:”Yes”},{“name”:”Country of Origin (subject to change)”,”normalizedValue”:”United States”,”value”:”United States”},{“name”:”Package Quantity”,”normalizedValue”:”1″,”value”:”1″}]