– Large screen (128×64 dot matrix LCD), allows for clear display of all functions and parameters – Hardness test can be taken at any angle including inverted. – A wide measuring range supports the hardness of all metallic materials. Hardness results are directly displayed in HRB, HHRC, HV, HB, HS, HL hardness scales. – Diameter of carbide ball: 3mm. – Large capacity memory storage of 500 sub groups. Stored information including single measured value, mean value, test data, impact direction, impact times, material and hardness scale are available. -¬è Upper and lower limit can be preset. An audio alarm will automatically sound when the reading is outside of the preset limits. – Battery voltage information is displayed including the charge status. – Calibration function is available. – USB1.1 port allows for information to be uploaded directly to a PC. -¬è High speed thermal printer allows for the readings to be immediately printed. -6V Ni-MH rechargeable battery are supplied. The batteries can be charged with the integrated charger. Up to 150 hours of continuous operation battery life between charges. (eL off and no printing) – Automatic power off after five minutes. – Range: (170-860)HLD, (17-68.5)HRC, (19-651)HB – Accuracy: HLD: ±5, HRC: ±1, HB: ±4 – With – Impact device – Hardness test block – Small support ring – Cleaning brush – Battery charger – Paper for printing – Manual – DataPro software – Communication cable