Description

[{“name”:”Item”,”normalizedValue”:”Lathe”,”rank”:1,”value”:”Lathe”},{“name”:”Compound Travel (In.)”,”normalizedValue”:”5-1/8″,”value”:”5-1/8″},{“name”:”Spindle Bore (In.)”,”normalizedValue”:”3-1/8″,”value”:”3-1/8″},{“name”:”Motor HP”,”normalizedValue”:”7.5″,”value”:”7-1/2″},{“name”:”Features”,”normalizedValue”:”3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSIi Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings”,”value”:”3-1/8 in Bore Spindle is Supported by Two Tapered Bearings and One Ball Bearing of Chrome Molybdenum, Headstock Gears are Hardened, Ground and Shaved, Universal Gearbox Allows Inch, Metric, Diametral and Module Pitch Threads, No Change Gears Required, Carriage Features One-Shot Lubrication and Turcite-B on Bed Sliding Surfaces, T-Slotted Compound Slide Featuring Four-Way Tool Post, One Piece Cast Iron Base Absorbs Vibration Allowing Heavier Cuts, High Quality ANSIi Class 50 Wear Resistant Cast Iron Bed Ways are Removable, Gap Allows Large Diameter Work, Five Position Automatic Carriage Stop Increases Productivity, Meehanite Castings”},{“name”:”Overall Length”,”normalizedValue”:”97 in”,”value”:”97 in”},{“name”:”Thread Range (In.)”,”normalizedValue”:”1-5/8 to 72″,”value”:”1-5/8 to 72″},{“name”:”Cross Feed Rates”,”normalizedValue”:”122″,”value”:”122″},{“name”:”Swing Over Cross Slide (In.)”,”normalizedValue”:”10″,”value”:”10″},{“name”:”Number of Threads (In.)”,”normalizedValue”:”61″,”value”:”61″},{“name”:”Swing Over Bed (In.)”,”normalizedValue”:”16″,”value”:”16″},{“name”:”Overall Width”,”normalizedValue”:”44 in”,”value”:”44 in”},{“name”:”Swing In Gap (In.)”,”normalizedValue”:”25-7/8″,”value”:”25-7/8″},{“name”:”Spindle Taper”,”normalizedValue”:”MT-7″,”value”:”MT-7″},{“name”:”Thread Range (mm)”,”normalizedValue”:”.05 to 20″,”value”:”.05 to 20″},{“name”:”Number of Spindle Speeds”,”normalizedValue”:”12″,”value”:”12″},{“name”:”Carriage Travel (In.)”,”normalizedValue”:”35″,”value”:”35″},{“name”:”Distance Between Centers (In.)”,”normalizedValue”:”40″,”value”:”40″},{“name”:”Phase”,”normalizedValue”:”Three”,”value”:”Three”},{“name”:”Longitudinal Feed Rates”,”normalizedValue”:”122″,”value”:”122″},{“name”:”Spindle Speed (RPM)”,”normalizedValue”:”25 to 1,800″,”value”:”25 to 1800″},{“name”:”Includes”,”normalizedValue”:”(3) 10 in Jaw Chuck (Mounted on Lathe), 16 in Faceplate for 18 in and 22 in Lathes, Articulating LED Work Lamp, Electronic Chuck Key Holder, Faceplate (12 in Faceplate for 14 in and 16 in Lathes), Follow Rest (Mounted on Lathe), Steady Rest (Mounted on Lathe)”,”value”:”(3) 10 in Jaw Chuck (Mounted on Lathe), 16 in Faceplate for 18 in and 22 in Lathes, Articulating LED Work Lamp, Electronic Chuck Key Holder, Faceplate (12 in Faceplate for 14 in and 16 in Lathes), Follow Rest (Mounted on Lathe), Steady Rest (Mounted on Lathe)”},{“name”:”Cross Travel (In.)”,”normalizedValue”:”9″,”value”:”9″},{“name”:”Number of Threads (mm)”,”normalizedValue”:”24″,”value”:”24″},{“name”:”Voltage”,”normalizedValue”:”230/460V AC”,”value”:”230/460V AC”},{“name”:”Tailstock Taper”,”normalizedValue”:”MT4″,”value”:”MT4″},{“name”:”Gap Length (In.)”,”normalizedValue”:”12″,”value”:”12″},{“name”:”Tailstock Travel (In.)”,”normalizedValue”:”5″,”value”:”5″},{“name”:”Overall Height”,”normalizedValue”:”66 in”,”value”:”66 in”},{“name”:”Application”,”normalizedValue”:”Metal Turning”,”value”:”Metal Turning”},{“name”:”Standards”,”normalizedValue”:”ANSI, OSHA”,”value”:”ANSI, OSHA”},{“name”:”Swing Over Cross Slide”,”normalizedValue”:”10 in”,”value”:”10 in”},{“name”:”Max. Metric Thread”,”normalizedValue”:”20 mm”,”value”:”20 mm”},{“name”:”Number of Metric Threads”,”normalizedValue”:”24″,”value”:”24″},{“name”:”Spindle Bore”,”normalizedValue”:”3-1/8 in”,”value”:”3 1/8 in”},{“name”:”Horsepower”,”normalizedValue”:”7.5″,”value”:”7 1/2 hp”},{“name”:”Distance Between Centers”,”normalizedValue”:”40 in”,”value”:”40 in”},{“name”:”Max. Cross Feed”,”normalizedValue”:”0.036 in”,”value”:”0.0360 in”},{“name”:”Swing In Gap”,”normalizedValue”:”25-7/8 in”,”value”:”25 7/8 in”},{“name”:”Min. Metric Thread”,”normalizedValue”:”0.05 mm”,”value”:”0.05 mm”},{“name”:”Min. Threads per Inch”,”normalizedValue”:”1.625″,”value”:”1 5/8″},{“name”:”Min. Cross Feed”,”normalizedValue”:”0.0006 in”,”value”:”0.0006 in”},{“name”:”Max. Spindle Speed”,”normalizedValue”:”1,800 rpm”,”value”:”1,800 RPM”},{“name”:”Bed Width”,”normalizedValue”:”13-1/8 in”,”value”:”13 1/8 in”},{“name”:”Max. Threads per Inch”,”normalizedValue”:”72″,”value”:”72″},{“name”:”Gap Length”,”normalizedValue”:”12-1/4 in”,”value”:”12 1/4 in”},{“name”:”Min. Spindle Speed”,”normalizedValue”:”25 RPM”,”value”:”25 RPM”},{“name”:”Spindle Nose Type”,”normalizedValue”:”D1-4 Camlock”,”value”:”D1-4 Camlock”},{“name”:”Swing Over Bed”,”normalizedValue”:”16 in”,”value”:”16 in”},{“name”:”Number of Inch Threads”,”normalizedValue”:”61″,”value”:”61″},{“name”:”Frequency”,”normalizedValue”:”60 Hz”,”value”:”60 Hz”},{“name”:”Sound Level”,”normalizedValue”:”88 dB”,”value”:”88 dB”},{“name”:”Threads per Inch – Maximum”,”normalizedValue”:”72″,”value”:”72″},{“name”:”Tailstock Spindle Travel”,”normalizedValue”:”5 in”,”value”:”5 in”},{“name”:”Swing Over Gap”,”normalizedValue”:”25-7/8 in”,”value”:”25 7/8 in”},{“name”:”Cross Feed – Maximum”,”normalizedValue”:”0.036 in/rev”,”value”:”0.036 in/rev”},{“name”:”Maximum Cross Slide Travel”,”normalizedValue”:”9 in”,”value”:”9 in”},{“name”:”Series”,”normalizedValue”:”GH-1640ZX”,”value”:”GH-1640ZX”},{“name”:”Overall Depth”,”normalizedValue”:”96 in”,”value”:”96 in”},{“name”:”Includes Taper Attachment”,”normalizedValue”:””,”value”:”Not Applicable”},{“name”:”Spindle Speed – Maximum”,”normalizedValue”:”1,800 rpm”,”value”:”1,800 RPM”},{“name”:”Maximum Carriage Travel”,”normalizedValue”:”35 in”,”value”:”35 in”},{“name”:”Includes Stand”,”normalizedValue”:”Stand Included”,”value”:”Stand Included”},{“name”:”Includes Digital Readout”,”normalizedValue”:””,”value”:”Not Applicable”},{“name”:”Includes Collet Closer”,”normalizedValue”:””,”value”:”Not Applicable”},{“name”:”Lathe Head Drive”,”normalizedValue”:”Gear Drive”,”value”:”Gear Drive”},{“name”:”Manufacturer Warranty”,”normalizedValue”:”2 yr”,”value”:”2 yr”},{“name”:”Longitudinal Feed – Maximum”,”normalizedValue”:”0.09 in/rev”,”value”:”0.09 in/rev”},{“name”:”Longitudinal Feed – Minimum”,”normalizedValue”:”0.0015 in/rev”,”value”:”0.0015 in/rev”},{“name”:”Maximum Compound Slide Travel”,”normalizedValue”:”5-1/8 in”,”value”:”5 1/8 in”},{“name”:”Spindle Nose Taper”,”normalizedValue”:”MT7″,”value”:”MT7″},{“name”:”Metric Thread – Minimum”,”normalizedValue”:”0.05 mm”,”value”:”0.05 mm”},{“name”:”Spindle Speed – Minimum”,”normalizedValue”:”25 RPM”,”value”:”25 RPM”},{“name”:”Cross Feed – Minimum”,”normalizedValue”:”0.0006 in/rev”,”value”:”0.0006 in/rev”},{“name”:”Threads per Inch – Minimum”,”normalizedValue”:”72″,”value”:”72″},{“name”:”Metric Thread – Maximum”,”normalizedValue”:”20 mm”,”value”:”20 mm”},{“name”:”Country of Origin (subject to change)”,”normalizedValue”:”China”,”value”:”China”},{“name”:”Package Quantity”,”normalizedValue”:”1″,”value”:”1″}]